Characterization of Protein Aggregates and Other Particles in Biopharmaceuticals

Characterization of Protein Aggregates and Other Particles in Biopharmaceuticals

FlowCam application note thumbnail - Characterization of protein aggregates and other particles in biopharmaceuticalsParticulates are ubiquitous in parenteral drug products and remain a concern throughout their development and production. These particles must be monitored to satisfy USP particle reporting requirements (e.g. USP <788>). Furthermore, in biopharmaceuticals such as protein therapeutics, these particles have been associated with adverse impacts on the efficacy and safety of the product. FDA regulations strongly recommend in-depth characterization of the quantity and types of particles found in biotherapeutics.

 

Light Obscuration (LO) is the primary compendial technique authorized by USP to monitor subvisible particles (i.e. particles 2-100 μm in diameter). While LO is effective for counting and sizing opaque particles, it is less effective at analyzing particles in biotherapeutics like aggregates of the active pharmaceutical ingredient (API) which are often highly translucent.

Flow imaging microscopy (FIM) is a USP-recognized orthogonal technique (via USP <1788>) to complement LO and other compendial techniques for particle counting and sizing. FIM instruments like FlowCam capture light microscopy images of particles as they flow through a flow cell. This method of particle detection can quickly count and size particles in a liquid sample. Since a digital image is recorded for each particle, FIM can also be used to capture particle morphology information not available from LO measurements.

Download our new application note to learn more about how FlowCam 8100 can accurately count and image particles in biotherapeutics. 

Download Application Note


FlowCam LO, a recent advancement in FIM technologies, allows users to perform simultaneous FIM and LO measurements in a single instrument using the same sample aliquot, integrating FIM with a compendial particle monitoring technique.

With FlowCam LO:

  • Correlate light obscuration data with flow imaging microscopy.
  • Reconcile data from a single sample, and a single run with two different technologies.
  • Save time and sample quantities by using a single instrument.
  • Obtain full particle characterization and improved sample throughput time in a single step.

Explore FlowCam Products for Analysis of Biotherapeutics

flowcam-8000-rendering

flowcam-lo-rendering-top-angle-transparent-angle flowcam-nano-rendering-transparent-background

FlowCam 8000

Size, concentration, and morphology by Flow Imaging Microscopy from 2 µm to 1 mm

FlowCam LO

Flow Imaging Microscopy and Light Obscuration in a single instrument

FlowCam Nano

Flow Imaging Microscopy for particles from 300 nm to 2 µm

Post Topics

Related Posts

Nurse with IV bag and patient in the background
Monitoring Subvisible Particle Formation in Infusion Bags Exposed to Stress Conditions
Agitation during transportation is one of the most ubiquitous stress conditions to which therapeutic protein formulations and other biotherapeutic …
Read Post
FlowCam images of IVIG proteins before and after drop shock
Study Uses FlowCam to Investigate Effects of Diluent and Silicone Oil on Particulate Formation in IV Bags
Protein aggregation is a major concern for biopharmaceuticals in post-production. Subvisible particles that form due to routine handling compromise …
Read Post
Need Supplies?

Find supplies and spare parts for your FlowCam instrument or ask for a quote. 

Order Now

Need Help?

Get technical support and application help. Request training or preventative maintenance.


Submit a Support Ticket

Need Information?

Check out our knowledge base including white papers, application notes, technical notes, and videos.

View Resources